Tööstuse uudised

Vaakumkuivati ​​reguleerimise ja juhtimise meetod

2021-07-08

Kontrollimeetodvaakumkuivati:

1. Enne silumist peame sulgema vaakumkuivatuskapi ukse, keerama ukse käepideme kinni, seejärel sulgema õhu vabastusventiili ja avama vaakumventiili. Loomulikult võib vaakumklapi lüliti olla üheks kasutamiseks tihe ja seda saab jõuliselt pöörata. Vaakumtoru ühendamiseks saame kasutada lisatarvikuid, vaakumkuivatusimitoru ja vaakumpumpa kindlalt ühendada.

2. When the vacuum pump power is turned on, it is necessary to start pumping. First, close the vacuum valve, and then turn off the vacuum pump power to prevent the oil in the vacuum pump from flowing back into the working chamber. At this time, the inside of the vaakumkuivati is in a vacuum state.

3. Lülitage seadme toide sisse vaakumkuivati first, then its power light will light up and perform a self-check, and then it will indicate that it has entered the state at this time. Set the temperature of the vaakumkuivati. When the temperature in the set machine is close to the specified temperature, the heating starts to enter the adjustment stage. It is normal that the measured temperature of the instrument exceeds the set temperature and the elongation is also lower than the set temperature. Therefore, if the temperature is already close to or equal to the set temperature when measuring the temperature, it can almost enter a constant temperature state after another 1-2 hours. If the required temperature is relatively low, you can use the second setting method to let it enter the constant temperature state as soon as possible.

Vacuum Dryer